Insights on Industrialised Construction with Jaimie Johnston MBE and Amy Marks | Built Environment Matters

Often don’t have a turbo brush, so may struggle more on carpet (although there are exceptions).

It sounds obvious, but emptying the bag or dirt canister is often the quickest way to make your vacuum smell better..If you have a bagless vacuum, then it’s also a good idea to clean the canister.

Insights on Industrialised Construction with Jaimie Johnston MBE and Amy Marks | Built Environment Matters

check the instructions for your specific vacuum., but the process is often:.Detach the bin from the vacuum.. Give it a gentle wash with a microfiber cloth and a small amount of washing up liquid..

Insights on Industrialised Construction with Jaimie Johnston MBE and Amy Marks | Built Environment Matters

Thoroughly rinse to remove any remaining bubbles..Allow to fully dry before reattaching.. Related Article:.

Insights on Industrialised Construction with Jaimie Johnston MBE and Amy Marks | Built Environment Matters

How to Clean Your Vacuum Cleaner.

Clean the Filters.Once the worst of the glass has been removed, you can mop up the worst of the liquids.

Kitchen roll is useful for this, as long as your hands are properly protected.Don’t use a towel as it may be difficult to remove the stuck glass shards.. (If the Floor is Dry) Use your vacuum hose on the remaining small shards.

If there are smaller shards remaining, you can suck them up with your vacuum’s hose – but only if the floor is dry.Don’t use the main floorhead with a spinning brush roll, as this could spread the shards around the home.

Previous
Previous

Sebo Vacuum Service & Repair in Middleton & Chadderton

Next
Next

Sebo Vacuum Repairs, Bags & Spares in Bredbury & Woodley